A-A-891C
Color choice (as specified from colors available in contracted manufacturer’s commercial selection).
Electro-mechanical requirements.
Typewriters shall be equipped with resilient feet or base to minimize movement and prevent marring of furniture. Minimum carriage clearance, without riser, shall be 85 mm (3 1/4 inch) from the desktop.
All keys and operating controls shall be easily accessible and in no case shall any controls be located on the back of the typewriter.
Unless otherwise specified, typewriter keyboards shall be in accordance with ANSI Standard X-4.23.
Typewriters shall operate on a 60 Hz, 115 V a.c. power source, unless otherwise specified. When specified, the typewriters shall conform to electro-magnetic interference requirements of MIL-STD-461, -462, -463, (on/off switch excepted from the requirements of these three standards).
Identification. Each typewriter shall have the manufacturer’s serial number and name or trademark permanently and legibly stamped or affixed on a major component in a readily accessible location.
Optional features, as specified.
1) Error correcting capability.
2) Proportional spacing.
3) Last line indicator.
4) Dual pitch capability.
Workmanship. Typewriters shall be be clean, free from faulty construction or any defects which may affect either appearance, serviceability or durability or constitute a hazard to the user.
Compliance. Typewriters shall conform to UL Standard No. 114. The issue of UL Standard No. 114 in effect on the date of the solicitation shall be used to determine compliance with this requirement.
Regulatory requirements. In accordance with Section 23.403 of the Federal Acquisition Regulations, the Government’s policy is to acquire items-composed of-the highest percentage of recovered materials practicable, consistent with maintaining a satisfactory
level of competition without adversely affecting performance requirements or exposing supplier’s employees to undue hazards from the recovered materials.
Preservation, packaging, packing, labelinq and marking. The preservation,
packaging, packing, labeling and marking shall be as specified in the contract or purchase order.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business